Pedaltrain Side Panel W/ (2) 1/4" Feedthru + PowerCON to Angle IEC
PP-0012-03-THRUP
3 Port Pedaltrain Panel with (2) 1/4" Locking TRS/TS Feedthrough Connectors and (1) PowerCON Input to Right Angle IEC C13 Connector
3 Port Pedaltrain Panel with (2) 1/4" Locking TRS/TS Feedthrough Connectors and (1) PowerCON Input to Right Angle IEC C13 Connector
The panel is setup standard as ports 1-2 as 1/4" and port #3 as the PowerCON. If you'd like this differently on your order, please specify on the customer notes when ordering. The Power Cable is measured from the back of the panel to the end of the IEC Connector.
PP-0012-03-THRUP Features:
- (1) BTPA side mount panel for Pedaltrain boards (labeled per specification)
- (2) 1/4" Feedthrough connectors
- (1) powerCON to right angle IEC C13 female cable assembly, per length ordered
- All necessary mounting hardware for panel and connectors
Some Assembly Required!
The panel comes without the connectors installed as the screw holes are at the top of the panel. Connectors inserted into the panel would block these holes and prevent installation. Panel Installation Video:
The PowerCON connector will not be installed to the panel. The line cord will be crimped with the necessary quick connects. After installing the Panel to the pedalboard, you will need to install the Power Cable to the PowerCON Connector. This is easily done as you just need to slide the lugs on to the tabs of the PowerCON Connector.
The PowerCON used is the Neutrik NAC3MPXXA connector, or Power In. It is preferable over a standard IEC as it features a locking connection. The right angle IEC features a "right side cable exit."
The panel is setup standard as ports 1-2 as 1/4" and port #3 as the PowerCON. If you'd like this differently on your order, please specify on the customer notes when ordering. The Power Cable is measured from the back of the panel to the end of the IEC Connector.
If you need a PowerCON Cable to mate with this panel, please see our custom length pre-made option, POWER10-XX If you want a PowerCON to install to any existing power cable you have (no soldering required), please check our MC-0831 connector.
This product works on all CURRENT Classic and Novo models of Pedaltrains. It will not fit on legacy Pedaltrain 2 or Pedaltrain 1 models. Higher feet must be added to the board for this to fit on Legacy Pedaltrain 2 and Pedaltrain 1 models.
**PLEASE NOTE THAT THESE ARE BUILT TO ORDER. ALL BUILT-TO-ORDER ASSEMBLIES FEATURE A LEAD-TIME OF 3-5 BUSINESS DAYS FOR PRODUCTION**
All cable assemblies are built-to-order and typically feature a 3-5 business day production lead-time. Most cable orders can be expedited via phone or email authorization for same day service at a 25% up charge before 12:00PM CST.
Stock Items: All stock items (i.e. bulk connectors and cabling) typically ship the same day or next business day of ordering. If an item is not in stock you will be notified via email with an expected ship date.
Cable Assemblies: All cable assemblies are built-to-order and typically feature a 3-5 business day lead-time. Most cable orders can be expedited via phone or email authorization for same day service at a 25% up charge before 12:00PM CST.
Shipping options are selected on the product checkout page. Yes, we ship internationally. Please see our Shipping page for more information regarding shipping - BTPA Shipping Information
