Panel powerCON In to Straight IEC Female

PW08-II


Panel (chassis) mount powerCON in to straight IEC C13 female cable tail

Assembly uses the NAC3MPXXA connector and is intended to mate with the NAC3FXXA for circuit breaking capability

  • $25.00
Qty:  

Panel (chassis) mount powerCON in to straight IEC C13 female cable tail

This assembly utilizes the Neutrik NAC3MPXXA connector and is intended to mate with the NAC3FXXA connector. The NAC3MPXXXA connector is considered a power "input" that supplies power to whatever you are mounting this in. An easy way to determine a powerCON input vs output is that powerCON inputs are blue and outputs are grey (speaking in terms of standard powerCON).

These assemblies are great for situations that a rugged, locking, locking connection is needed. Whether you are in a live touring setting or a studio, powerCON is a great way to ensure your gear is reliably powered. In addition to providing a robust locking connection to your application, the powerCON helps to save wear and tear on your gear's power jack from constantly plugging/unplugging.

Assembly Features:

  • Rugged locking power connection
  • Circuit Breaking Connection (CBC): Superior electrical endurance allowing for safely engaging/disengaging live or under load
  • Suitable for studio or live/stage settings
  • Ease of install to existing panels or systems
  • Low profile cabling for easily routing and bending in tight corners of a rack or pedalboard
  • Neutrik SCDR rubber boot for protection at connector terminals + durability
  • Includes (2) 4-40 Screws for mounting to any BTPA panel with tapped holes (mounts to the front of the panel)
  • Includes Neutrik MFD plate + (2) Screws for those that wish to rear mount the powerCON Cable

Some Assembly Required!


NOTE: The powerCON does not come connected to the IEC cable tail. The cable tail comes pre-terminated with the quick connects to slide onto the powerCON. We do not install the cable to the powerCON as all of our paneling is sold with tapped 4-40 screw holes. You would not be able to fit the IEC Cable tail through the opening of the panel to install. Simply slide the cable through the back of the panel and connect the quick connects to the appropriate tabs of the powerCON. Then, slide the rubber boot over the connector for protection. IT IS IMPORTANT TO CONNECT THE CORRECT WIRES TO THE CORRECT TERMINALS ON THE POWERCON. NOT DOING SO WILL CAUSE DAMAGE TO YOUR EQUIPMENT AND BTPA WILL NOT BE RESPONSIBLE.

  • White = N
  • Black = L
  • Green = Ground Symbol

Once the terminals are connected, slide the boot on and screw the powerCON into the panel. You are ready to go!

The kit also comes with screws for rear-mounting the powerCON. Some people like to mount the panel connector on the backside of the panel for a "cleaner" look. We offer the Neutrik MFD plate and two screws with the assembly for you to do this.

Cable Length: If you'd like to purchase the cable at a longer length than our dropdown allows, please do not hesitated to contact our sales team at sales@btpa.com. We can gladly look into accommodating your need.

    • Weight
      0.03 lbs
    • SKU
      PW08-II
  • Chassis Connector Type
    powerCON XX
  • Chassis Connector Brand
    Neutrik
  • Chassis Connector Part Number
    NAC3MPXXA
  • Chassis Connector Gender
    Input
  • Cable Connector Type
    IEC C13
  • Cable Connector Brand
    N/A
  • Cable Connector Part Number
    N/A
  • Cable Connector Gender
    Female
  • Cable Type
    Line Cord
  • Cable Brand
    N/A
  • Cable Gauge
    18 AWG
  • Number of Conductors
    3
  • Manufacturer
    Best-Tronics Mfg., Inc.
  • Cable Length
    4 inches, 5 inches, 6 inches, 7 inches, 8 inches, 9 inches, 10 inches, 11 inches, 12 inches, 13 inches, 14 inches, 15 inches, 16 inches, 17 inches, 18 inches, 19 inches, 20 inches, 21 inches, 22 inches, 23 inches, 24 inches, 25 inches, 26 inches, 27 inches, 28 inches, 29 inches, 30 inches, 31 inches, 32 inches, 33 inches, 34 inches, 35 inches, 36 inches, 37 inches, 38 inches, 39 inches, 40 inches


NOTE: The powerCON does not come connected to the IEC cable tail. The cable tail comes pre-terminated with the quick connects to slide onto the powerCON. We do not install the cable to the powerCON as all of our paneling is sold with tapped 4-40 screw holes. You would not be able to fit the IEC Cable tail through the opening of the panel to install. Simply slide the cable through the back of the panel and connect the quick connects to the appropriate tabs of the powerCON. Then, slide the rubber boot over the connector for protection. IT IS IMPORTANT TO CONNECT THE CORRECT WIRES TO THE CORRECT TERMINALS ON THE POWERCON. NOT DOING SO WILL CAUSE DAMAGE TO YOUR EQUIPMENT AND BTPA WILL NOT BE RESPONSIBLE.

  • White = N
  • Black = L
  • Green = Ground Symbol

Once the terminals are connected, slide the boot on and screw the powerCON into the panel. You are ready to go!

The kit also comes with screws for rear-mounting the powerCON. Some people like to mount the panel connector on the backside of the panel for a "cleaner" look. We offer the Neutrik MFD plate and two screws with the assembly for you to do this.

Cable Length: If you'd like to purchase the cable at a longer length than our dropdown allows, please do not hesitated to contact our sales team at sales@btpa.com. We can gladly look into accommodating your need.

How do we measure our cables?

All cables made by BTPA are measured per our Standard Operating Procedure SOP-0013 with the exception of our guitar pedal patch cables which have a tighter tolerance and are measure per SOP-0012.

All cable assemblies are built-to-order and typically feature a 3-5 business day production lead-time. Most cable orders can be expedited via phone or email authorization for same day service at a 25% up charge before 12:00PM CST.

Stock Items: All stock items (i.e. bulk connectors and cabling) typically ship the same day or next business day of ordering. If an item is not in stock you will be notified via email with an expected ship date.

Cable Assemblies: All cable assemblies are built-to-order and typically feature a 3-5 business day lead-time. Most cable orders can be expedited via phone or email authorization for same day service at a 25% up charge before 12:00PM CST.

Shipping options are selected on the product checkout page. Yes, we ship internationally. Please see our Shipping page for more information regarding shipping - BTPA Shipping Information

Merchandise may be returned only after receiving a Return Authorization Number from our customer service department. Merchandise must be returned PREPAID via an insured service within 30 days from date of receipt and is subject to a 25% inspection & restocking charge (except in-warranty defective merchandise or merchandise shipped in error by Best-Tronics Mfg., Inc.). Shipping & handling charges are not refundable. All returned merchandise must be in resellable condition. If any of these items are compromised, missing or lost, we reserve the right to refuse the return or apply a restocking fee above the standard percentage charge.

For warranty returns, please see our warranty policy.

Items that are custom-made and non-standard items on our site are subject to non-returnable

Related products

Customers who bought this product also bought

Customers who viewed this product bought