We are giving away this pedalboard! We had a trade show this month and wired up a pedalboard for display. This pedalboard would get minimal use in the shop and mostly collect dust, so we figured – why not give this to a good home!
Giveaway Details
Please note: You must be in the contintental U.S. to qualify! Apologies to our friends outside of the U.S. but we simply cannot swing it this time around. To enter:
- Fill out the entry form at the giveaway landing page
- Follow our instagram for an additional entry – BTPA Instagram
- Subscribe to our YouTube for an additional entry – BTPA YouTube
- Follow our Facebook page for an additional entry – BTPA Facebook
Check out our Giveaway Landing Page to enter.
**Giveaway ends 11/8/2024. Winner will be announced on socials and notified via e-mail. The winner will have until noon (CST) Monday 11/11/2024 to respond before a new winner is selected.
Pedalboard Rundown & Details
The pedalboard is centered around the RJM PBC 6/X switcher. The PBC 6/X is fed from the pedalboards side locking input. The PBC’s second input is programmed to be an “Always On” Output that feeds the Peterson Tuner. The signal chain is then as follows:
- Loop 1: Wampler Ego 76
- Loop 2: Vertex Steel String
- Loop 3: JHS Morning Glory
- Loop 4 (Stereo): Eventide H90
- Loop 5 (Stereo): Strymon Timeline
- Loop 6 (Stereo): Strymon BigSky
- PBC Output (Stereo) -> Strymon Iridium (Stereo) Input
- Iridium Stereo Output -> Radial J48 Stereo DI Input
- J48 XLR Outputs (Side Panel)
- J48 1/4″ THRU ports (Side Panel)
The board is wired to be fully stereo. The board feeds into the Strymon Iridium Amp/Cab sim. This pedal goes to the Radial J48 Stereo DI so that it can be ran direct to FOH. The DI is not a complete necessity; however it provides the availability for ground lifts + the THRU ports, which is nice.
What If I Don’t Want To Run Direct?
No sweat. The Radial J48 has 1/4″ THRU ports. These run to the side panel of the board as well. In the event you don’t want to run direct, you can plug these into two amplifiers and leave the Iridium in the standby/off state.
MIDI / Control
The board is wired for full MIDI control and operation. The PBC 6/X can control the Eventide H90, Strymon Timeline, Strymon BigSky, and the Strymon Iridium.
BUT WAIT! There’s MORE! – The JHS Morning Glory has a side control port for their Red Remote. We have this connected to the CONTROL port of the PBC 6/X. This means you can control the remote gain toggle on the pedal via the PBC 6/X. You can program this to an instant access button – or within a preset. The options are endless.
