CIO-CRX

CIOKS CRUX is the ultimate add-on to CIOKS DC7 if you are using a Neural DSP Quad Cortex, a Line 6 HX-series pedal or another power-hungry 9V or 12V multi-effects pedal. Simply connect the CRUX to the 24V outlet on DC7, set the correct voltage on CRUX, connect the appropriate CIOKS Flex cable from CRUX to your multi-effect pedal and you are good to go. 

Using CRUX frees up the outlets on DC7 that would otherwise be needed to run these devices (for instance four for a Neural DSP Quad Cortex and two outlets for a Line HX Stomp), allowing you to run more pedals along with your multi-effects device. CRUX therefore provides a simpler, more reliable setup and gives you more options for connecting additional pedals.

What's in the box:

1x Flex 1050 – Type 1 - 5,5/2,1mm DC-plug, center negative, L-shape, 30cm (black)
1 x Flex 3050 - Type 3 - 5,5/2,5mm DC plug, center negative, L-shape, 50cm (yellow)
1 x L2415 DC Link cable - EIAJ to EIAJ, 15cm (black)
1 x CRUX adapter
1 x L2415 DC Link cable
2 x Flex cables, #1050 and #3050
Mounting hardware for Pedaltrain and Templeaudio boards
1 x Product manual
1 x Flex Guide
1 x CIOKS sticker sheet