2.1mm x 5.5mm R/A Current Doubler Cable

Dual right angle 2.1 x 5.5mm DC power to single right angle 2.1 x 5.5mm DC power cable, current doubling cable

This current doubler cable is perfect for connecting your power supply to your power hungry, center negative, pedal! No need for adapters, just plug both DC power connectors into the power supply and the single 2.1mm DC connector into your pedal, and you are done.

Cable Features/Specs:

• Polarity: Center Negative, typically "Standard" for pedals.
  • Not sure of your pedal's polarity?! Consult the pedal or the manual. Often times, it is printed directly on the pedal. If you see this symbol, the pedal is center negative -
• DC Barrel Size: 2.1mm x 5.5mm, the most commonly used DC barrel size in the effects world 
• Tour Worthy Durability: All of our DC power connectors are potted with a custom epoxy from our Fiber Optic department. This adds a bulletproof housing and connection point on the DC power plug end. 
  • Why do we do this? The DC plugs comprise of two parts that snap into one another. Due to rattling and vibrations on the road/when in transit - these can easily fall apart. Most companies use a ty-wrap to hold these together. These can also come loose and fall down the connector housing. The epoxy is a sure-shot way to ensure the connector/cable lasts night in and night out on your rig.
• Custom Length: No more bunched up cable or crazy adapters because what you have is too short! Simply type the length you'd like (in inches) and add to cart. Then sit back and relax while we build the cable exactly to your specs
• Low Profile Cable: The cable used within this assembly is our very own, CA-0671. This cable was specifically designed for rack and pedalboard routing. It is a small diameter (low-profile) cable that is extremely flexible, allowing for easy routing within your rack or pedalboard. Can you say, clean and tidy cable runs?!
• How is this cable measured?: We measure this cable from the point where each plug mates with the device it is plugging into. This diagram should help - SOP-0013 All cables are built featuring a tolerance of +/- 0.25"

Disclaimer: We are not responsible for damage to your gear for incorrectly powering your pedals or using incorrect cables. If you are unsure of what you need, consult your pedal manual, the pedal manufacturer, or ask us by emailing sales@btpa.com